PCC logo Fall 2012 - Credit Classes
Schedule of Classes and Open/Closed Class List
Machine Shop
Engineering & Technology Division
Room IT200 - (626) 585-7267

PCC Home -- Course Information -- Bookstore -- Engineering and Technology -- Department List

MACH 220 MACHINE SHOP TECHNOLOGY 9 Units

Theory and operations on equipment such as drill presses, lathes, mills, grinders, numerical control mills and electrical discharge machines. No credit if taken after Mach 220A, B or C. Total of 81 hours lecture and 243 hours laboratory. Grading: Letter Grade Only

   #1257  7:30am-11:45am MTuW    LecLab  IT117  NGUYEN PHU  
       &  8:00am- 3:20pm Sat             IT117  MARTINEZ J  

MACH 220A INTRODUCTION TO MANUFACTURING TECHNOLOGY 3 Units

Use of basic shop hand tools, theory of tool sharpening, tool grinding on the pedestal grinder. Introduction to lathe and mill operations. Lathe operations to include: facing, grooving, tapers using the compound, deep drilling, single point threading, chucking of rectangular material and use of the boring bar. Use of the slitting saw on the mill. Precision layout. Shop safety. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1261                 TBA     LecLab  IT117  NGUYEN PHU  
      6.8 Hours TBA per week
No. 1261: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.

   #0363  6:00pm- 9:20pm TuTh    LecLab  IT117  MARTINEZ J  

MACH 220B INTERMEDIATE MACHINE TECHNOLOGY I 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220A.
Operation of the power hacksaw and band saw. Pocket milling on the vertical milling machine. Study of threaded fasteners: thread form, nomenclature and classification of thread fit. Produce threads with dies and inspect with thread measuring tools. Review of math skills. Use of shop measurement tools. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1265                 TBA     LecLab  IT117  NGUYEN PHU  
    &                 TBA             IT117  MARTINEZ J  
No. 1265: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.

   #0353  6:00pm- 9:20pm TuTh    LecLab  IT117  MARTINEZ J  

MACH 220C INTERMEDIATE MACHINE TECHNOLOGY II 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220B.
Lathe operation including roughing and the use of a form tool to cut an internal and external radius. Pattern millwork using a 60-degree form cutter. Theory and practice of non-ferrous metal machining. Performance of multiple operations on the band saw, mill and lathe to produce and assemble a complete part. Application of Digital Read Outs (DRO) on the lathe and mill. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1269                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1269: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:30 MTThF.

   #0358  6:00pm- 9:20pm TuTh    LecLab  IT117  MARTINEZ J  

MACH 220D ADVANCED MILLIING OPERATIONS I 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220C.
Milling machine operation using ball end mills and corner rounding cutters. Combined drilling, slotting and threading to complete a part. Perform knurling, threading and cross drilling of small components on the lathe. Bending and heat treatment of tool steel from round stock. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1273                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1273: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220E ADVANCED MILLING OPERATIONS II 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220D.
Theory and technique on the use of slotting and single angle cutters on the horizontal milling machine. Use of T- slot cutters and the rotary table on the vertical mill. Production drilling: working with multiple parts. Surface grinding theory and wheel selection. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1277                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1277: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220F ADVANCED LATHE OPERATIONS 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220E.
Production of long tapers on the lathe with an offset tailstock. Knurling a thin wall part. Use of a lathe radius attachment to cut inside and outside radii. Lathe deep drilling, cross drilling and threading of a round part. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1281                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1281: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220G PRODUCTION TECHNOLOGY I 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220F.
Lathe techniques for multiple parts. Production line lathe roughing, tapering; threading; counter boring; stepping in diameter; and knurling. Production milling of angles, cross drilling and swedging. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1285                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1285: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220H PRODUCTION TECHNOLOGY II 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220G.
Use of the milling machine in the preparation of stock for surface grinding. Production drilling techniques. Advanced milling to produce parallel and square parts. Develop surface grinder skills to produce multiple parts to parallel and a specific size. Verification of square with a high precision dial indicator. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1289                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1289: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220I PRODUCTION TECHNOLOGY III 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220H.
Use of fixtures and the rotary table on the milling machine to produce multiple parts. Milling grooves, counter bores and swedging. Theory of production threading. Practical threading with a die. Use of gauges to inspect threads. Sine bar inspection methods. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1293                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1293: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220J TOOL MAKING I 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220I.
Advanced lathe turning: radius, single point, internal and external threading. Milling a dovetail to size and the use of reamers. Milling machine engraving. Theory and operation of the electro discharge machine. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1297                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1297: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220K TOOL MAKING II 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220J.
Advanced milling machine roughing and fly cutting. Milling parallel and square to close tolerances. Surface grinding: parallel, square and to size. Advanced part inspection. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1301                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1301: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


MACH 220L ADVANCED PROTOTYPE MACHINING 3 Units

Prerequisite(s): Enrollment in or completion of Mach 220K.
Special projects to be selected by the student and presented to the instructor for approval. Student must provide a sketch of the project and a complete order of operations sheet. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only
#1305                 TBA     LecLab  IT117  NGUYEN PHU  
No. 1305: Students should arrange their TBA hours with the instructor, within the following time span: 7:30-12:20 MTThF.


Information valid as of 6/13/2013 at 7:30:48 AM