PCC Home -- Course Information -- Bookstore -- Engineering and Technology -- Department List
|ENGR 2||ENGINEERING GRAPHICS||3 Units|
Interdisciplinary Course: Engineering, Engineering Design Technology Introduction to engineering and technical drawings through the use of sketching, computer-aided drafting (CAD) and dimensioning. Techniques covered include geometric construction, orthographic projection, pictorial methods, section and auxiliary views, basic descriptive geometry, 2D CAD, and 3D CAD parametric solid modeling. May not be taken concurrently with or after EDT 8A or DRFTG 8A. Recommended MATH 402 or MATH 400B. Total of 27 hours lecture and 81 hours laboratory. Transfer Credit: CSU; UC Grading: Letter Grade Only
#6533 Cancelled 8:30am-11:50am TuTh LecLab IT214 KEEHN M A
All Sections of ENGR 2 are Closed.
|ENGR 10||INTRODUCTION TO ENGINEERING||2 Units|
Introduction to the field of engineering with emphasis on engineering activities characterized in different engineering disciplines and functions. Topics include education and training requirements, ethical and environmental concerns, historical and engineering design activities. Recommended enrollment in or completion of MATH 9 or preparation to enter MATH 5A. Total of 18 hours lecture and 54 hours of laboratory. Transfer Credit: CSU; UC Grading: Letter Grade Only
#6039 Closed 8:30am-10:45am TuTh LecLab IT215 ARZOUMANIAN
#6461 Closed 9:00am- Noon MTuWTh LecLab IT215 ARZOUMANIAN
Short Term: 05/13/13-06/20/13
#4896 Closed 1:00pm- 3:15pm MW LecLab IT215 ARZOUMANIAN
All Sections of ENGR 10 are Closed.
|ENGR 15B||APPLIED MECHANICS||3 Units|
Prerequisite(s): Math 5B.
States of stress and strain; analysis and design of structural elements; pressure vessels, beams, torsion bars, springs, columns, riveted and welded connections; inelastic behavior; strength under combined loading; statically indeterminate structures. Total of 54 hours lecture. Transfer Credit: CSU; UC Grading: Letter Grade Only
#4324 Closed 8:50am-10:25am TuTh Lecture IT224 SALOMON P M
All Sections of ENGR 15B are Closed.
|ENGR 16||ENGINEERING CIRCUITS||3 Units|
Prerequisite(s): Math 5B.
Mesh and nodal analysis of electric circuits using Ohm's and Kirchhoff's Laws; Thevenin and Norton Theorems; superposition; transient analysis of RL and RC circuits; steady state analysis of AC circuits; analysis of passive two-port networks; polyphase circuits. Total of 54 hours lecture. Transfer Credit: CSU; UC Grading: Letter Grade Only
#7464 Closed 10:25am- Noon TuTh Lecture IT224 SALOMON P M
All Sections of ENGR 16 are Closed.