Use of basic shop hand tools, theory of tool sharpening, tool grinding on the pedestal grinder. Introduction to lathe and mill operations. Lathe operations to include: facing, grooving, tapers using the compound, deep drilling, single point threading, chucking of rectangular material and use of the boring bar. Use of the slitting saw on the mill. Precision layout. Shop safety. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5179 Closed                     6:00pm- 9:20pm TuTh    LecLab  IT117  MARTINEZ J  

Prerequisite(s): Enrollment in or completion of Mach 220A.
Operation of the power hacksaw and band saw. Pocket milling on the vertical milling machine. Study of threaded fasteners: thread form, nomenclature and classification of thread fit. Produce threads with dies and inspect with thread measuring tools. Review of math skills. Use of shop measurement tools. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5183 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7905 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220B.
Lathe operation including roughing and the use of a form tool to cut an internal and external radius. Pattern millwork using a 60-degree form cutter. Theory and practice of non-ferrous metal machining. Performance of multiple operations on the band saw, mill and lathe to produce and assemble a complete part. Application of Digital Read Outs (DRO) on the lathe and mill. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5186 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7906 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220C.
Milling machine operation using ball end mills and corner rounding cutters. Combined drilling, slotting and threading to complete a part. Perform knurling, threading and cross drilling of small components on the lathe. Bending and heat treatment of tool steel from round stock. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5189 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7907 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220D.
Theory and technique on the use of slotting and single angle cutters on the horizontal milling machine. Use of T- slot cutters and the rotary table on the vertical mill. Production drilling: working with multiple parts. Surface grinding theory and wheel selection. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5192 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7908 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220E.
Production of long tapers on the lathe with an offset tailstock. Knurling a thin wall part. Use of a lathe radius attachment to cut inside and outside radii. Lathe deep drilling, cross drilling and threading of a round part. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5195 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7909 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220F.
Lathe techniques for multiple parts. Production line lathe roughing, tapering; threading; counter boring; stepping in diameter; and knurling. Production milling of angles, cross drilling and swedging. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5198 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7910 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220G.
Use of the milling machine in the preparation of stock for surface grinding. Production drilling techniques. Advanced milling to produce parallel and square parts. Develop surface grinder skills to produce multiple parts to parallel and a specific size. Verification of square with a high precision dial indicator. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5201 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7911 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220H.
Use of fixtures and the rotary table on the milling machine to produce multiple parts. Milling grooves, counter bores and swedging. Theory of production threading. Practical threading with a die. Use of gauges to inspect threads. Sine bar inspection methods. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5204 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7912 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220I.
Advanced lathe turning: radius, single point, internal and external threading. Milling a dovetail to size and the use of reamers. Milling machine engraving. Theory and operation of the electro discharge machine. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5207 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7913 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220J.
Advanced milling machine roughing and fly cutting. Milling parallel and square to close tolerances. Surface grinding: parallel, square and to size. Advanced part inspection. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5210 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7914 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13

Prerequisite(s): Enrollment in or completion of Mach 220K.
Special projects to be selected by the student and presented to the instructor for approval. Student must provide a sketch of the project and a complete order of operations sheet. Total of 27 hours lecture and 81 hours laboratory. Grading: Letter Grade Only

   #5213 Closed                     7:30am-10:50am MW      LecLab  IT117  NGUYEN PHU  

   #7915 Closed                     4:30pm- 9:00pm MTuWTh  LecLab  IT117  MARTINEZ J  

         Short Term: 05/13/13-06/20/13